Refinished Coffee Table

Before:

Before

After:

After I refinished an old coffee table.

Steps:

Sand table top (Use stripper if necessary) starting with 100 grit, then 150 grip, and finishing up to 220 grit.   Lightly sand legs. Tape off seam between top and underside.

Sanded the top down to bare wood.

Paint legs with chalk paint 1 or 2 coats depending on your preference. Using multiple thin coats creates the strongest finish. Allow to dry. Apply wax to chalk paint if desired

Stained top and chalk painted legs

Re-tape seam between top and legs. Stain table top by spreading a thin coat of stain evenly across the top with a clean dry rag.  Follow the manufacturer’s instructions but usually entail wiping away any excess within a minute and allowing to dry for several hours. Apply 2nd coat if desired according to manufacturer instructions.

Apply polyurethane to table top using a foam or natural bristle applicator.  As always follow manufacturer’s instructions. Usually 2-3 coats allowing an hour dry time in between coats along with a light sanding. Remove the tape carefully while wet after the final coat.

Enjoy!