A lot of the projects I write about are around my house. It’s certainly been a work in progress. The half bath upstairs that was renovated fairly recently, so it was clean and somewhat modern but was in need of a refresh. These easy and inexpensive DIY industrial pipe shelves were just what it needed to add some character!
I have seen similar products in pictures and thought that it would match with that space, a bit rustic and a bit modern. I also have brushed iron hardware already in this room so it tied it all together.
What I really like about these is the versatility you can get just by changing the wood color, tone or effect. They look great with light raw wood, dark stained, grey washed or weathered wood. You can use thick slabs of wood or go for a thinner sleek look. Everything looks good!
Installation
At the moment, I’m using 2 pieces of sanded 2×4’s! I intended to darken them and give them a rustic worn finish but I haven’t had the time. I actually plan to make a coordinating wood and hook curtain “rod” to match but I have been waiting to find the perfect piece of free wood 🙂 It’s easier to finish them all together to keep them with a consistent look.
Well there is not much as far as directions for these industrial pipe shelves. Here are some links to the products I ordered. *Disclaimer – these are affiliate links that may earn a small commission if you purchase a product at no additional charge to you.
- Rustic Pipe Decor Industrial Shelf Brackets – Set of Four, Industrial Steel Grey Fittings, Flanges, Pipes for Custom Floating Shelves, Vintage Furniture Decorations, Wall Mounted DIY Bracket, 8 Inch
- 2 x 4’s or wood shelf materials
You will need wall anchors if you are not directly drilling into studs. Make sure you use a level to hang the pipes. I would have a space of 24-48″ between pipes. I cut the wood with about 3″ overhang on each side.